[Daza1000]

Re: Zanussi DW908 Dishwasher not heating water/drying

Hi,

Following my last post.

Fitted the new door thermostat anyway. Hey preston all appears to be working OK. Even run it twice just to be sure, open the door mid-cycle water is certainly hot !

Many thanks Peguin for your time and advice, greatly recieved and appreciated.

Thanks all.

PS I’ll be recommending this site to whomever needs simlar assistance

[Daza1000]

Re: Zanussi DW908 Dishwasher not heating water/drying

Hi again..

New door thermostat arrived today… Prior to fitting I tested for continuity against the old one. Strangely enough they both read the same ? Showing continuity accross the terminals (closed circuit). According to previous advice this should not be the case ! Unless I completely misunderstood. Wouldn’t be the first time in my haste..lol

Out of interest the element is showing continuity between the terminals as is the thermostat accross pairs of tag connectors (located next to heating element) ….

Many thanks Daza

[Daza1000]

Re: Zanussi DW908 Dishwasher not heating water/drying

Once again many, many thanks for the swift responce !!! 😀

I’ll replace the thermostat and will post the results.

Best Regards
Daza

[Daza1000]

Re: Zanussi DW908 Dishwasher not heating water/drying

Hi Penguin,

With such a prompt reply though i’d look at this asap.

Thermostat removed and shows continuity accross the terminals when tested and with the meter set at 200 ohms a reading of 00.5 is returned ?

[Daza1000]

Re: Zanussi DW908 Dishwasher not heating water/drying

many thanks. I’ll check this out shortly and report back ..

[Author]

Posts