Forum Replies Created
-
Posts
-
Re: SERVIS 1500 RPM Fasilogic M3025W – skipping rinse/spin c
The drum can rotate during the initial part of the wash program but the rinse and spin (I’m presuming it doesn’t rinse as it needs the spin to begin) doesn’t happen, nor if the machine is set to empty and spin – it empties but doesn’t spin (sits making a humming noise – motor?) at spin speed, or any speed! as if the next level to go to is missing so to speak) Doesn’t make any noise when failing in wash just turns off as if hasn’t the ability to spin so stops…
Re: SERVIS 1500 RPM Easilogic M3025W – will not spin
It stops in the wash cycle, for example, with the water in but refusing to spin (it can physically rotate, whether easily ie. not struggling I can’t tell) then the Start light goes out. Selecting Empty and Spin will pump out the water but won’t / can’t spin…Tried to use OUST in case of limescale but couldn’t complete the 60 degree wash for it obviously…
Thanks
Re: SERVIS 1500 RPM Fasilogic M3025W – skipping rinse/spin c
Filter may have been loose though so problem is just skipping spin cycle on programme…
Re: Servis tumble dryer problem…On/Off switch…
Was simple on/off switch – contact on spring has come loose and wasn’t staying in contact. Replaced and now fine. Thanks for your help…
Re: SERVIS 1500 RPM Fasilogic M3025W – skipping spin cycle
deanfergi wrote:Can anyone advise? SN: 20030404195-0010077177-11 01
Tumble dryer just been faulty too (power switch replaced and ok now)
These came as a package – coincidence they both fail at the same time almost?!… 😥JUST SPIN CYCLE ACTUALLY…Has leaked at the bottom/filter recently. Limescale stopping spin or anything like that maybe?
Re: Servis tumble dryer problem…On/Off switch…Serial#
You did, that it might be the door or on/off switch. I’m asking if it’s easily replaced or mended…thanks for your earlier help…
The serial number is 20030502517-018077022-02 01Thanks… 😕
Re: Servis tumble dryer problem…On/Off switch…
Thanks….Will get it…it’s at my g/f’s house – lost the one I got previously…
Re: Servis tumble dryer. Power ok but doesn’t engage…
I’ve got to see it now so apologies for lack of reply..It is a M2002W model and what happens is that when the on button is pressed the power light comes on briefly (half a second) then goes off. Could the switch be slipping or broken ins 😕 ide or an electrical component be overloading?
