[dhe]

Re: Siemens fridge/freezer help please.

I got Bosch KGV3210GB/02 which is about 5 years old now, last week it had an exactly same problem like other people’s. after reading the posts here, I decided to have a try. this is what I did, and hope it can help others who has the same model whith same problem. after switching off the fridge freezer and unplug the power cable, I opened the control panel from the top of the fridge and pull out the connector on right side of the module control board, then I measured the resistance, , the reading between wire 1 (light brown) and wire 3 (dark blue) was about 8.2 k ohm, and the reading between wire2 (dark brown) and wire4 (light blue) was 1.88 m ohm, which seems to me dosen’t make sense. so I cut wire2 and wire 4 and jointed the ends together, and put the connector back, then switched on fridge freezer, it started to work. Next morning, I opened the fridge I could see ice on back wall, I also checked the temp. selctor dial and the supper freezing button, they all looked back to work. now the fridge freezer’s temp. is controlled relying on one sensor from freezer, I guess the temp. in fridge will fluctuate a lot, anyway it’s better than not working at all. Thanks for everyone here to provide the repair information.

[Author]

Posts