Forum Replies Created
-
Posts
-
Re: liebherr CL 1650 ice maker not making ice
Thank you Tony
When I input 9590151 into ukwhitegoods, I see two cradles and the arm, not the tray with the sensor.
And that is quite a price for all of that.
I believe I only need the sensor that is attached to the underside of the tray.
Could I not just purchase the sensor, by itself?
Thank you
DietmarRe: liebherr CL 1650 ice maker not making ice
Thank you Tony R
I did as you suggested in above post. It passed that test.
I finally was able to take the ice maker home. Took out that sensor under the ice tray, and I put my ohm meter on it. At room temp and at freezer temp (in a block of ice, 0F, 18C) there was not any continuity.
So I think that you are right, I need a new sensor for the bottom of that ice tray.
Do you know if they are all the same? Do you have a part #?
My fridge is a CL 1650
Thank you
DietmarRe: liebherr CL 1650 ice maker not making ice
Thank you Tony R
this fridge is in my mother’s flat, and I will try that later this week, when I have to go there.
I will post results.Re: liebherr CL 1650 ice maker not making ice
I am not sure where the top of the ice bin, where you mean.
At the bottom of where the water sits, before ice is made, under the tray, I guess, is two wires that go under a piece of foam, between the foam and the tray. Is this the magnet? If so, yes it is there. If the magnet is above the rotating tray, then I did not see it.
Thanks for the update on the arm. Yes it stays in the up position, only coming down when the tray rotates, then returns to the up position.
