[DrDeath]

Re: indesit wil133

So iv now sucessfully fixed the fault.
led1 and led3 detects that it is a pressostat problem…

“Inspect the wires on the pressostat. I would imagine they are burnt and brittle and not connecting correctly…….

I think there are 4 wires in the block. I would re crimp all 4 and connect back into correct place only if they are burnt tho. You should know by just pulling the wire i expect it will come off in your hands….

Power Off b4 doin this

Sparkyp”
Wiring was ok but knowing this i ordered a pressure switch from this website on sun, dispatched mon and arrived promptly on tues morning, replaced the switch and all went well, now completes all cycles.

Total cost £11.50 inc postage.

Hope this can help somebody else. Thanks to everybody Specially Sparky P.

[Author]

Posts