Edwards

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 20, 2017 at 8:55 am in reply to: ISE w1607w Drain Pump #443759
    Edwards
    Participant

    Re: ISE w1607w Drain Pump

    Hi

    This video covers it. https://www.youtube.com/watch?v=6bV7XLmqfzE (Don’t be put off by the different model/manufacturer, this is what the ISE is based on)

    Took me about 20 minutes, if that, and was very easy. You’ll need some pinch clamp pliers (or just get some screw type hose clamps. It comes with the pinch type)

    There are no screws holding the pump in, it slides in to rubber mounts.

    Hope this helps

    December 22, 2016 at 2:41 pm in reply to: ISE w1607w Drain Pump #443756
    Edwards
    Participant

    Re: ISE w1607w Drain Pump

    I fitted this yesterday and it’s done the trick! Thanks again for your help.

    December 14, 2016 at 2:49 pm in reply to: ISE w1607w Drain Pump #443755
    Edwards
    Participant

    Re: ISE w1607w Drain Pump

    Great. Thanks for your help 😀

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)