[Elwood]

Re: Diplomat ADP 8902 reset procedure

Thanks very much, Jake, for your prompt and accurate replies. It was as you said; the drain pump had jammed. Once I’d learned the “secret” of removing the bottom tray, it was fairly simple to extract the pump.

The dishwasher is working well again. I’ve learned a lot whilst repairing it and I’ve saved a lot of money. My thanks to you again.

Regards
Raymond

[Elwood]

Re: Diplomat ADP 8902 reset procedure

Thanks for the response.

I’ve dragged the machine out and made sure the bottom tray is empty of water. I can see where the pumps are underneath, but for the life of me I cannot see how to remove the bottom tray to gain access to the pumps. I would have thought the tray would simply pull out, but it seems firmly secured. From underneath, I can see the thread ends of 4 screws, but there is no way of accessing the heads from between the bottom of the washer and the undertray.

I was shocked to find that an engineer wants £75 just to come and diagonose the fault. How does this tray come out so that I can DIY this problem and save a lot of money?

Thanks again

[Author]

Posts