[emids]

Re: Ariston Margherita 2000 – I also have a problem!

hi chaps ive solved it 😀
the 2 sensor wires on the heater were stretched, this was an assembely error as the loom clips to the drum casing with a nylon tie were very tight i assume they connected the 2 wires first then secured the loom after, this was so tight that over time the vibrations cut the wires in the plastic sheath.
now running sweet and its had a good service to boot 😆
hope this helps someone else in the future
thanks guys u rock
emids

[emids]

Re: Ariston Margherita 2000 – I also have a problem!

hi penguine its an ariston margerhita 2000 awd12s uk advantage 1200 spin 1200w dryer its a washer dryer combo m8
cheers
emids

[emids]

Re: Ariston Margherita 2000 – I also have a problem!

hi all
sorry to hijack the thread but it saves opening a new thread
i have a awd12s with error code 13 flashing
i have read through the problems others have had (pump,pressure sw etc and totally cleaned and checked everything pipe/switch/heater related and all is clean
i noticed on the chocolate(crap) pcb there was 1 connecter corroded dull so i cleaned them all and reflowed any dull joints but still get the error
if anyone knows what the error is i would be greatful.
if i need a pcb i will repair this with components of a better quality rather than buying chocolate pcb’s they really are p155 poor
thanks
emids

[Author]

Posts