[Fintaneduffy]

Yea this os the replacement part.
At 150 quid, if its possible id much rather spend a 5er replacing the dodgy components, when i am fit to do it

https://shop.ukwhitegoods.co.uk/481221848186-fridge-freezer-control-pcb

[Fintaneduffy]

On a few other threads here, they seemed to say it was these components that failed.
I am getting flickering lights when i adjust the temp, or operate the ice/water.

I did actually desolder them and measured them.
The 3 showed different values from 0.3uf to 0.1uf which is not what they should be reading i guess.
Im guessing they should be showing closer to 0.68uf give or take the 10{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} tolerance, so i am only guessing these are the problem parts

[Fintaneduffy]

Ok that makes sense,
It would save cost of new board as they are so dear,
Il order some replacement parts of similar type like you said,

And if anyone has succesfully replaced them, feel free to let me knkw aswell, cost of the parts are nothing compared to a board.
Thanks again and if i succeed, il post up the results.

[Fintaneduffy]

Thanks for your reply mate, but i am a bit wary of the use of the word “should be fine” leaves me a bit hesitant to order just any x type capacitor

I dont wish to replace these with incorrect items.
The ones on that site seem very small compared to what is on the board.

More wondering has anyone succesfully found these components or something close, any links for these parts posted in other threads, links are all dead now so i cant find anything close.

[Fintaneduffy]

Yea but there are so many types to choose from, dont want getting the wrong type capacitor or does it matter?

[Author]

Posts