Forum Replies Created
-
Posts
-
Re: ISE in London N5
I know given all that I have read about these machines that they are unlikely to break down any time soon, but is there anyone local to me who is a recommended independent repairer for ISE?
Re: ISE W288eco door query
Thank you both, that’s just the information I need – and thanks for taking those two photos iadom – makes it very clear. Assuming there is someone who can supply, install and maintain in the N5 area of London, I shall place an order.
Re: ISE W288eco door query
That makes sense but I’d be grateful for confirmation of the back to front dimension when the door is at 90 degrees and also when it is open to its full extent, i.e. opening it as far back beyond 90 degrees as possible. I appreciate this will probably have to wait until Tuesday.
I’d also be grateful for confirmation that there are no parts that protrude beyond the back of the top surface of the machine.
Thanks again
Re: ISE W288eco door query
Thanks kwatt. It’s a temporary siting for the machine but, from the back of an existing appliance in the same place, I have 1050mm to play with. The specs say that when the door is open, the overall depth is 955mm. It should be enough, albeit a bit of a squeeze, but if the door opens beyond 90 degrees so much the better. Do you know the depth with the door fully open? Thanks again
Re: miele w149 inner lid
The inner drum seems to be in the correct position, Phil, but doesn’t turn and, from memory, I don’t think it ever did when opening the top and inner lid.
From what you are saying it seems as though I will just have to bite the bullet and call the repairman.
Many thanks for your help and advice.
Simon
