[frdcre]

Re: 75/400 Creda tumble dryer (bought 1978)

Thankyou Martin, I’m preparing for the belt arrival– not here yet. This website’s shop advised POL08 was the right one — we shall see! I’ll report back

[frdcre]

Re: 75/400 Creda tumble dryer (bought 1978)

Now as Martin said comes the tricky bit. How do you detach the flanged pulley wheel in order to get the belt round it? Presumably do that first then stretch the belt around the drum?

[frdcre]

Re: 75/400 Creda tumble dryer (bought 1978)

Thankyou again for all your help. Your store has suggested POL 08 which I’ve ordered. regards fre

[frdcre]

Re: 75/400 Creda tumble dryer (bought 1978)

Thankyou ladom. The belt is 192 cm long and 7mm wide. It has the number 611739 on it, as well as “industrial products”, Wigan England. Regards F

[frdcre]

Re: 75/400 Creda tumble dryer (bought 1978)

OK brilliant! Got the top off, and found broken belt.

Presumably, if I can get a new one it just fits round the outside of the drum, and into the flanged pulley wheel? Any idea where I get the belt?

[frdcre]

Re: 75/400 Creda tumble dryer (bought 1978)

Got it loose at the back, but there are NO screws at the side, and at the front the screws there seem to be securing a separate panel. Shall I remove the front ones anyway?

[frdcre]

Re: 75/400 Creda tumble dryer (bought 1978)

Thankyou Martin, I’ll have a go!

[frdcre]

Re: 75/400 Creda tumble dryer (bought 1978)

Thankyou guys — on mine there is no ‘top’. The casing is continuous. On the back it has serial 182308, model 75/400. From the instruction book it is a TD400. Is there access from the back — ie behind the spinning disc?
regards

[Author]

Posts