Frederick

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • in reply to: Bosch fridge freezer faulty help needed please #133152
    Frederick
    Participant

    Re: Bosch fridge freezer faulty help needed please

    BSH-MAN wrote:With that model number it sounds like a sensor fault. The sensor cannot be replaced, but there is an inexpensive repair kit available that by passes this sensor.
    A typical reported fault for this would be “fridge freezer not running, but if I switch it off then on it works —- for a while.”

    I think you may need professional help. 😉

    Well I think you may be correct, after 5 hours of fitting the new control module it has just now stopped working again, EG lights are on but no noise and fridge and freezer inoporable.

    Do you know what kit consists of, or is it a case of shorting out a couple of wires I read sometime ago on some place on the net.

    Many thanks for your help.

    Frederick

    in reply to: Bosch fridge freezer faulty help needed please #133149
    Frederick
    Participant

    Re: Bosch fridge freezer faulty help needed please

    Dave_Conway wrote:Switching it on and off momenteraly has probably caused this to be honest.

    Power it down for a few hours and try again, it should reset the PCB if it’s been “upset” by the sudden loss and regain of power.

    Dave.


    Thanks for your reply.

    Ive just switched it on and now it seems to be working, do you think it could have been the control unit that was causing this problem?

    If it shuts down again in the next few hours what would you think is the problem? When it does stop refridgerating the LED on the control unit is still on but the fridge and freezer both stop to work and the elements on the back of the fridge get cold.

    Thanks

Viewing 2 posts - 1 through 2 (of 2 total)