gegsy

Forum Replies Created

Viewing 15 posts - 5,431 through 5,445 (of 6,724 total)
  • Author
    Posts
  • in reply to: Football #174880
    gegsy
    Participant

    Re: World Cup 2006

    😛

    in reply to: Bosch wok 2001 #175318
    gegsy
    Participant

    Re: Bosch wok 2001

    Back to basics, check pump for resistence, pressure system etc

    Greg

    gegsy
    Participant

    Re: Siemens Washing Machine Extraklasse XLS 140 – Door open

    Relatively easy. All done from front. Remove door seal retainer, peel door seal away from porthole, access from there. Power off of course :plug:

    Greg

    in reply to: Bosch wok 2001 #175316
    gegsy
    Participant

    Re: Bosch wok 2001

    Hi Rob
    It basically means it can’t empty for whatever reason.
    Check pump, drain hose etc
    There is a filter on the front behind flap, check there for debris.

    Greg

    in reply to: WTE6920GB/01 fascia removal #174873
    gegsy
    Participant

    Re: WTE6920GB/01 fascia removal

    356893 complete

    Greg

    in reply to: AEG LAVAMAT – CHANGED BRUSHES BUT STILL C9 CODE #126767
    gegsy
    Participant

    Re: AEG LAVAMAT – CHANGED BRUSHES BUT STILL C9 CODE

    I would imagine motor blown PCB 😥

    Greg

    in reply to: Angry German #174865
    gegsy
    Participant

    Re: Angry German

    I take it his team lost :rotfl:

    He mentions a save by Poom, would that be Ar5enals No2 goalie Mart Poom :tup: .

    Seriously though he should lay off the smarties, all that colouring isn’t doing anything for is mental state poor kid.

    Greg

    in reply to: WTE6920GB/01 fascia removal #174870
    gegsy
    Participant

    Re: WTE6920GB/01 fascia removal

    Hi
    It is held by lugs at bottom and lips under at top.
    Its a devil to get off without breaking at least one lug 😈

    Check yer email BTW for what help a diagram is.

    Greg

    in reply to: Bosch WFF2001GB/10 #174741
    gegsy
    Participant

    Re: Bosch WFF2001GB/10

    ChrisR wrote:Hi guys.

    The start light just flashes and nothing happens after the programme has been selected and the on/off switched on.

    Chris.

    By that statement I would glean that its more or less an instant thing the start light flashing.
    I would put money on interlock, shame Chris hasn’t got back with flash count as Boro rightly asked for.

    Greg

    in reply to: Bosch sms 4452GB/11 not filling #174709
    gegsy
    Participant

    Re: Bosch sms 4452GB/11 not filling

    Dont forget power off before repairing :plug:

    Greg

    in reply to: AEG LAVAMAT – CHANGED BRUSHES BUT STILL C9 CODE #126765
    gegsy
    Participant

    Re: AEG LAVAMAT – CHANGED BRUSHES BUT STILL C9 CODE

    If brushes are in correct orientation, it maybe damage to motor commutator, ie raised seg/s.
    If you can get your finger to touch copper segs as you manually turn motor (Motor not connected to machine) and feel for any imperfections. If any are felt its new motor Im afraid.
    Also personally I wouldn’t use any other aid than a comstick on the motor com.

    Power off first :plug:

    Greg

    in reply to: “Ooooh Matron” ? #164528
    gegsy
    Participant

    Re: Anguis in herba

    :rotl:

    in reply to: whirlpool built in freezers #174764
    gegsy
    Participant

    Re: whirlpool built in freezers

    Hi
    Ive had a few and some other makes aswell.
    I suspect poor/faulty insulation.

    Greg

    gegsy
    Participant

    Re: Siemens Washing Machine Extraklasse XLS 140 – Door open

    Im sure PM to Dave Conway with part number given will get you a result.

    Greg

    in reply to: Spam #167891
    gegsy
    Participant

    Re: Spam

    Tiny url noted Ken 🙂

    Thanks

    Greg

Viewing 15 posts - 5,431 through 5,445 (of 6,724 total)