[Ginoworm]

Re: IWDE126 error 1+2+4 flashing?

so wife remembered she had a card for an appliance engineer, called him as only £20 call out if we didn’t get him to do any work, told him what j did and the error code, he did some tests and replaced the temp sensor, so I had got to the right part but didn’t have a clue how to test, don’t feel so bad now and he only charged £35 all in to replace, will be keeping his number handy.

Thanks the advice though.

[Ginoworm]

Re: IWDE126 error 1+2+4 flashing?

Ok going to attempt this tonight, just want to check a couple of things first:

When I run a drain program it starts and stops instantly and does not continue although the pump is brand new, is this a side effect of the F13 error?

So when I look at the dryer assembly I will check cables and that the fan is moving, how would I be able to check the temp sensor is working?

After buying a new pump already I want to limit my costs as the wife is already moaning we should have called somebody out 🙂

[Ginoworm]

Re: IWDE126 error 1+2+4 flashing?

Thanks again, is the dryer assembly on the top of the unit?

[Ginoworm]

Re: IWDE126 error 1+2+4 flashing?

Thanks for the quick reply, I seem to remember my wife saying the washing wasn’t drying properly before it started faulting, I checked all the connections I could see, don’t recall seeing a fan, any further guidance?

[Author]

Posts