[GrahamManchester]

Re: Hotpoint WD62P motor replacement

Hello again,
I switched the machine on yesterday, and it worked fine!
The W/M is 20 years old and I’ve just replaced the door switch too. The drum bearings are quiet and there’s just a leak to sort out where the dryer blower attaches to the drum – an o-ring maybe? Anyway that’s a job for another weekend…
Thanks for all your advice.

Graham.

[GrahamManchester]

Re: Hotpoint WD62P motor replacement

Thanks both,
I’ll find out tomorrow when I power it up, I’ll let you know what happens ..!

[GrahamManchester]

Re: Hotpoint WD62P motor replacement

Thanks Dave,
The motor and plug both have 7 pins and they do mate with a bit of a push (it’s the same size of plug but 2 of the 3 ident. notches don’t match up . I heard that the 2 tacho. wires were in a different position between the different motors, but they actually match up, so I’m not sure if there is an issue with this ACC motor.
Graham

[Author]

Posts