[Greenmachineguy]

Re: Bosch Classixx 6 Express 1400 "1 min" fault

Hi Martin
Once again this forum has saved me a few bob and I’ve learnt a lot too! I removed the sump hose and gave it a really good clean and then removed the pump too to clean the inlets/outlets (power off and disconnected of course), there was a bit of gunk in there. I checked all the connections to make sure they were ok too. After reconnecting the hoses and trying it out on a cycle it worked well and completed a cycle with all the spins and drains where they should be.
Thanks again for the helpful advice, if there’s a way I can buy you a virtual beer let me know!
You guys are diamonds!!
Cheers
GMG

[Greenmachineguy]

Re: Bosch Classixx 6 Express 1400 "1 min" fault

Thanks Martin
I’ll try those suggestions out and let you know. Really appreciate the rapid response!

[Author]

Posts