[handwash]

Re: MODERATORS;APM 6855 “pig in the poke” ??????

Thanks Kwatt from your reply and that of others I have just noticed that there is no ventilation at the base of F/F unit(kick base) 😳 😳 ,suprise suprise wonderful joiner who fitted kitchen didn’t think to put one in place,looked up in loft from bits and pieces he left and there is exactly ventilation part you are talking about.1st job I do tomorrow.
Have checked the doors as best I could and am confident that they were closing over completely,although I remember a few choice words when they were working on that area of the kitchen 😯 😯 .
All in all F/F has been off for 24 hrs 24 to go will leave it out of unit for a week or so after I switch it back on and see how things go.
Once again thanks to all for taking the time to respond,it is much appreciated 🙂 🙂 🙂

[handwash]

Re: MFI fridge freezer problem help

Hi Squalshy

I did same as you a few weeks back and thought it was also solved,however old problem back,hence switched off and have taken f/f out of unit,there was signs of water on base of kitchen floor at rear of unit,not enought to make me panic,however there is still some in plastic dish at bottom of f/f and it is this I am trying to remove.Will leave f/f off for the 48 hours as advised however from what I have read it would appear this again may only be a short term fix and an engineer will be needed.

Am I overeacting or is this a poor quality product seems to be a well posted fault 😕 😕

Cheers

[handwash]

Re: MFI fridge freezer problem help

Dales power off unit out in Kitchen,towels deployed,first problem sorry 😳 can’t get the little plastic water catcher off at base of unit ,does it twist,turn ,lift ,dont want to break it,have got most of the water out. thanks

[handwash]

Re: MFI fridge freezer problem help

Thanks will do 🙂

[handwash]

Re: Fixing of integral fridge freezer

stoneco8 wrote:Within the next month or so, you will find the faults appearing again.

If you post the model of the fridge id be happy to help with the solution.

It could be a fault on the defrost side, letting to much ice build up and stopping the cold air being circulated properly.

Thanks.
Hi stoneco8 mines is exactly same model and has just done exactly what you said would happen,have switched it off again and will put back on after 48 hrs,do you think I should try something else or is it engineer time .Much obliged for any help /info you can offer.

[handwash]

Re: MFI fridge freezer problem help

ron1050 wrote:Hi

I too have the same problem with the APM 6855, fridge is warm but freezer OK. First happened after 18 months round about Xmas 06, turning off appliance for 48 hours did the job but it seems to be a recurring problem – it happened again 3 months later, the 2 months later and then again – if I carry on at this rate will be de-frosting it every month! – Also the freezer dept gets really iced up badly.

Must be something wrong?
Same here ron1050 switching off unit as we speak will leave for 48 hrs,did the same appx 6- 8 weeks ago and looked to be ok ,but same symptom freezer ok fridge temp displaying h,do you think i need an engineer if happens again any help /advice most welcome

[handwash]

Re: INTERGRATED WASHING MACHINES

Hi all can I just say the biggest thank you to Dave,Penguin 45 and gegsy 😀 😀 😀
Pump arrived 8am Saturday morning ,fitted it that afternoon and we feel as though we have a brand new machine,old pump was indeed broken ,the impellor I think that is what you call it was loose .

a week ago we were looking at spending around £500 + on a new machine ,old one repaired for under £20 can’t thank you enough.

Cheers for now 🙂 🙂

[handwash]

Re: INTERGRATED WASHING MACHINES

Thanks Dave didn’t doubt u for one moment 😳
The wife however doubts I can pull this off 😯 , part ordered due to arrive next 2 to 5 days.

I am up for it any last minute bits of advice.

You would think I WAS ABOUT TO PERFORM OPEN HEART SURGERY 😳 😳

Cheers keep up the good work 🙂

[handwash]

Re: INTERGRATED WASHING MACHINES

Many many thanks know I am being a pest 😳 my model number did not show up in the list shown that pump could be used for ,take it is still ok ,model no was APM 8522 🙂

I am up for ordering part I am ok with general DIY is there much in fitting new pump or somewhere I can read through procedure.

Once again much obliged for the time and trouble for your replies,I will keep you in the loop if you can just confirm it is correct part .

Kind Regards

[handwash]

Re: INTERGRATED WASHING MACHINES

thinking of contacting a local independent repairer no this sounds stupid but would you know the manufacturer of my machine from the model number above .
Manual does not give a name HONEST 😳 😳

[handwash]

Re: INTERGRATED WASHING MACHINES

model no on manual readsAPM 8522.

I unscrewed filter it was clear ,removed some pipes (rubber) adj /feeding into filter again clear.

Strange thing happened machine when through full wash and spin still noisy but washing spunvirtually dry 😀 😀

Did another wash back to square one no spin and water still in machine have had to drain it manually.

Again many thanks for replies ,my better half pushing to go shopping this weekend suprise,suprise.
Will look at contacts you have given for local repairers
Cheers

[handwash]

Re: INTERGRATED WASHING MACHINES

tahnks for replies off to work but will be right on the case and will get back to you with numbers etc
thanks again 🙂 🙂

[Author]

Posts