Forum Replies Created
-
Posts
-
Re: bush dishwasher
i dont suppose theres much chance of a wiring diagram for it ???? as a lat resort
Re: bush dishwasher
hate giving up but got to way the cost of time and parts against cost of new machine yet another nearly new machine goes to the tip going into dark room now to take the tablets
Re: bush dishwasher
the bush poo model number is WQP12-9348 the serial number is
120214294 stange thing is i can disconnect level switch tube and it makes no differece to the level andstill clicks onto drain and E1 its filling fast enough gets to well below flood condition have connected wash pump independent of controll panel so it runs when filling but stiil pumps out and guess what E1
NOW BANGING HEAD ON WALLRe: bush dishwasher
on filling it gets no where near to a suitable level before it pumps out and E1 comes on
Re: bush dishwasher
whilei am waiting for customer can you inform me what does the litle device on the side of water chamber does it has2 wies attached to it think its some sort of sencer
Re: bush dishwasher
thanks all i no at this moment is its a built in one and am trying to contact customer to find what heap of poo it is i suppose there are more than 1 that makes the b/i getting deeper into the pile
Re: indesit iwd71250
motor o/k still showing 1 second on time delay and it changes to f01 and f09 wich indicates motor and communication between boards if i diconnect the pressure switch it goes into spin changed switch still problem i give up
Re: indesit iwd71250
if left on for a few minutes it now shows fo1 wich is motor problem and lights flashing would it be tacho or brushes /field coils ??
Re: indesit iwd71250
further to the fault when machine is on it shows 1 second left on delay timer and cannot be switched of at the facia control board the only way to switch machine display is to turn fixed appliance socket off and on then if you switch on by push button it disdlays 1 second again with lights flashing
Re: hoover dyn81440
yeh thanks i have as i said traced the connections to the board and its there we cannot get voltage so we know the wiring and pump is o/k and runs but its somewhere on the area on the board around the connector block as we get voltage on some solder connections but not knowing electronics to well and emw have repaired the board and says it was o/k seems like a send back situation more time waiting
Re: indesit power board
p/numbers i have found are espares c00145013
whitegoods c0028297
indesit c00254535 all lust suitable for indesit w/d WIDL126UK so thinking indesit should be most favorite fitted c00254535 but then found it differs from original board in so far as no eprom or mounting for one to be fitted life with indecent sorry indesit HELP
NormanRe: indesit power board
have now foundseveral part numbers for this power board on different sites life gets difficult
