Helgulf

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 8, 2007 at 2:30 am in reply to: Indesit wil 145 Continuisly flashing #203636
    Helgulf
    Participant

    I found what i was looking for in another post:) it stated:
    ——————————————————————————–
    OK – going by the “codes”, this is specifically a temperature sensor fault. This can mean:

    The sensor is faulty.
    The wiring/connector is faulty.
    The computer board is faulty

    February 8, 2007 at 2:26 am in reply to: Indesit WIDL 126 Error Code – LEDs 3 + 4 #187985
    Helgulf
    Participant

    i have the same machine only the EU version, it started with a loud rumbeling noise after 3 months when the concrete weights got loose in the bottom, now it coocked my clothes and put out the same code as described above.. {e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d})

    February 8, 2007 at 1:22 am in reply to: Indesit WDE12UK noise #203151
    Helgulf
    Participant

    Re: Indesit WDE12UK noise

    Hi there.. 😀

    I have the same machine, and i had a noise problem with it, it turned out to be the weight fastenings that keeps the concrete blocks in place on the outside of the drum, the problem was easily fixed by fastening these screws witch had gotten loose..

    Regards Helge N.
    Norway.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)