hickepa2

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • in reply to: Whirlpool American Fridge Freezer broken down – help! #141970
    hickepa2
    Participant

    Re: Whirlpool American Fridge Freezer broken down – help!

    I am now looking to get caps to replace on the ‘bad’ board I have, this is the info from the caps at the following locations (from the replacement board)….
    C1 : M102369222A T8-1u K275V
    C7, C6, C5, C8 : M102349375B T7-u22 275V
    C26, C27, C28 : N101939019C T2-u1M 275V

    guy in maplin cannot supply as there is no farad rating on the device . . .

    can someone familiar with this shed any light ? ?

    in reply to: Whirlpool American Fridge Freezer broken down – help! #141966
    hickepa2
    Participant

    Re: Whirlpool American Fridge Freezer broken down – help!

    A quick note of thanks, especially to DufferUK, for the advice I gleaned from reading through the posts. I have a 25cuft model, that exhibited alot of the symptoms discussed, clicking, uneven water flow, temp problems, alarms. It then shut down, I confirmed the refridgeration unit was okso off I went surfing and found you guys, I ordered a replacement back board from this site, delivered in days, problem solved. Grand total of 90quid sterling (including delivery),.The replacement card has considerably different caps in the 4 suspect locations and also at C1, C26, C27, C28. I will now replace these once I can get a hold of replacements and will have a back up board….. that no doubt I will never need.

    Thanks guys

Viewing 2 posts - 1 through 2 (of 2 total)