Forum Replies Created
-
AuthorPosts
-
July 5, 2010 at 10:45 am in reply to: [SOLVED] Kenwood KDW12ST3A E3 Code, Looking for Information #320701
HoldenHSV
ParticipantHi, I’ve had the same e3 problem. i have replaced the stats and it started to heat without a problem but the next wash i put on came up e3 again and it’s blown the stats. The element is ok.
Anyone any idea’s? or am i looking at a new dishwasher.September 25, 2007 at 3:42 pm in reply to: Knocking sound at low RPM from Bosch Logixx 1400 Express #224016HoldenHSV
ParticipantRe: Knocking sound at low RPM from Bosch Logixx 1400 Express
Yep as said it will be the spring rubbing on the chassis. There are some small plastic inserts available part no 552829. No drilling req.
HoldenHSV
ParticipantRe: Bosch Frost Free Fridge Freezer
Correct, this is caused by a blocked pipe from the freezer. No defrost will cure this as it’s not a problem with ice. If the model is KGU—– pull the appliance forward and unplug it. You will see the compressor and on top it has a plastic tray, from this tray there will be a pipe running up into the bottom of the freezer. This pipe can be pulled off easily, once removed clean with hot soapy water and refit. Turn appliance off now for at least 6 hours to clear any residual ice in the freezer. Once turned back on you should find that this has cured it.
HoldenHSV
ParticipantRe: Bosch Frost Free Fridge Freezer
Correct, this is caused by a blocked pipe from the freezer. No defrost will cure this as it’s not a problem with ice. If the model is KGU—– pull the appliance forward and unplug it. You will see the compressor and on top it has a plastic tray, from this tray there will be a pipe running up into the bottom of the freezer. This pipe can be pulled off easily, once removed clean with hot soapy water and refit. Turn appliance off now for at least 6 hours to clear any residual ice in the freezer. Once turned back on you should find that this has cured it.
-
AuthorPosts
