Forum Replies Created
-
Posts
-
when you say”all parts are shown seperately” can you post a link to a parts diagram? I haven’t found one.
But I think I’ve solved my problem. I’ve glued a small piece of plastic shim to the actuator so it presses a bit further, and now it works. Its not very professional but its working now. Time will tell how long that lasts .Dave. Yes Ive checked switch with a multimeter and its good. Also pressing it manually does activate the pyro function, so I know that all works. Its just that the plastic actuator doesn’t quite press it far enough to activate. Next step will be to either replace the switch or just “extend” the actuator. The switch is a DX41 single pole double throw which is easily available but they seem to come with different connector configurations so its important I get one which is physically plug compatible. That means I’ll have to take the oven apart again to get the dimensions. Thanks for your continued interest and help.
Dave, Thank for that. I’ve looked into the lock mechanism and found the switch. There are two microswitches a white one and a grey one. Its the grey one which is supposed to activate when the door is locked. I can see that the operating lever comes up to it, depresses it slightly, but not enough to activate. Has anyone encountered that before ?
