Forum Replies Created
-
Posts
-
Re: Bosch SGV53EO3GB/56 Problem
Martin wrote:
Honkycat wrote:
NomadPaul, can you advise me?I thought he already had done just that :rolls:
Well, He gave me 3 possibilities and now I was looking for specific advice on one of them.
To be honest, If I had “a good grounding in electro/mechanical knowledge” I wouldn’t need to come to this forum looking for advice.
I’ll try elsewhere for help.Re: Bosch SGV53EO3GB/56 Problem
My question is, how difficult a job would it be to replace the heating element myself and how much roughly do they cost? I’ve never done anything like this before and without knowing what I’m doing or getting advice from those that do, it’s difficult to be pro-active.
Thanks.Re: Bosch SGV53EO3GB/56 Problem
So it looks like maybe the heater is done? Could I replace this myself do you think? I really want to get this resolved soon… I can’t afford a new machine.
Re: Bosch SGV53EO3GB/56 Problem
No, there’s none of that sort of thing. It seems to start ok, but just goes on for hours. You can hear the water being sprayed and everything, and the dishes do (eventually) come out clean (apart from the white deposits).
Re: Bosch SGV53EO3GB/56 Problem
Thanks,
So what can I do to check for a problem leading to lack of water or heating?
When I open the machine in the morning (after its 5-6 hour cycle) the dishes are fairly wet, and the plates have a little white deposit on the lower edges… as does some of the cutlery.
Thanks.Re: Bosch SGV53EO3GB/56 Problem
Is replacing the module something I could do myself?
I’ve been unable to get a response from Bosch service centre so, if possible, I’d quite like to just order a part and do it myself.
Any advice would be appreciated..Thanks,
Steve.
