[htg]

Re: Bosch KGU 3102GB/54

Hi Gegsy, Thank you for your reply. I had called engineer around last year, who carried out temp. test and suggested that I lower the temp. to about 5c ( previously I had on 3c). This made some difference as it started forming water dropplets on the back panel of fridge. Now I have the setting on 6c or7c and the ice still forms.
I am willing to give it a try by changing some parts myself. (I am auto electrician by trade) and feel confident of tackling the job, unless its refrigerant problem.
Would like to know as to how to go about testing and accessing of sensors and heaters, possibly I can replace these before looking at pcb which is probably the most expensive.
Also where on the appliance are these parts located.
Any other tips greatly appreciated.
Thank you and look forward to your reply.

[htg]

Re: whirpool washer/ dryer 1200

Thanks guys, for your input. It was drainage problem. Machine drain pipe connected to under sink trap. Pipe was blocked, water draining away slowly and filling sink. The water in the sink refilling machine and the cycle went on and on. Thanks

[Author]

Posts