ickey

Forum Replies Created

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • in reply to: Diplomat ADP8332 #218346
    ickey
    Participant

    Re: Diplomat ADP8332

    OH 🙁

    Thanks for all the help though!

    in reply to: Diplomat ADP8332 #218344
    ickey
    Participant

    IMPELLOR? is that the spindle thing with a magnet around it? If so, the magnet is cracked along it’s entire length?

    It spins freely but no click.

    in reply to: Diplomat ADP8332 #218342
    ickey
    Participant

    Re: Diplomat ADP8332

    Well, it,s out, apart and cleaned, just trying to get it back together, i assume it just twists back together – easier said than done! is there a knack or specific way it goes back?

    in reply to: Diplomat ADP8332 #218341
    ickey
    Participant

    Re: Diplomat ADP8332

    Cheers!

    I’ll post back once it get the damn thing out!

    in reply to: Diplomat ADP8332 #218339
    ickey
    Participant

    Re: Diplomat ADP8332

    OK

    On the side it says:

    ASKOLL

    MOD M95
    ART 295106
    COD 461972474391

    in reply to: Diplomat ADP8332 #218337
    ickey
    Participant

    Re: Diplomat ADP8332

    RIGHT – I have enthusiasticaly taken the bottom off, then got stuck! i take it the pump in question is the big one to the right (looking at the bottom with it on its back facing up) with two hoses coming off it. The hose clips look tamper proof, i.e, i dont know how to get them off!

    in reply to: Diplomat ADP8332 #218335
    ickey
    Participant

    Re: Diplomat ADP8332

    thanks for that, will a blockage be fairly obvious to see and easy to clear?

    in reply to: Diplomat ADP8332 #218333
    ickey
    Participant

    Re: Diplomat ADP8332

    the circulation bit, it drains ok, then fills, then just humms for a bit and stops……..

    in reply to: Diplomat ADP8332 #218331
    ickey
    Participant

    Re: Diplomat ADP8332

    Sorry – full model is ADP 8332 🙂

Viewing 9 posts - 1 through 9 (of 9 total)