[Isla WS]

Hiya Kai,
Have done that with the pressure pipe to no avail unfortunately.
The PCB did come with some photocopied instructions to program it but I cannot access the programming mode on the machine, nor make sense of which number I need to use off the sticker on the machine. All said though, the programs all come up correctly on the display so am assuming it’s programmed correctly.
​​​​​​

[Isla WS]

Hiya Dave,
Bought it direct from Bosch & it’s identical, all the programs select correctly etc.,

[Isla WS]

Okay no worries thank you Andy…if only Haynes Manuals catered for washing machines lol

[Isla WS]

Ah okay thank you. The original PCB had visibly blown a transistor tho, the hose to the pressure switch is clear and there are no fault codes showing.
There are 3 wires to the pressure switch, does anyone know if (and which) I could bridge on the multiplug to trick the PCB into thinking the pressure switch was working?
I would rather prove a part had failed before ordering a replacement. Am considering just replacing the machine otherwise.

[Author]

Posts