italoabri

Forum Replies Created

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • in reply to: Haus dishwasher won’t fill #386470
    italoabri
    Participant

    Re: Haus dishwasher won’t fill

    Hi Jackal,
    Thank you and you have provided the most compelling reason to stop wasting my time on this piece of Argos Junk and thanks to everyone else who contributed – all with the same conclusion.

    in reply to: Haus dishwasher won’t fill #386468
    italoabri
    Participant

    Re: Haus dishwasher won’t fill

    Thanks. I just noticed that Argos now sell exactly the same product, with the same code under the brand of ProAction. Not sure what it tells me other than the fact that parts must be available – somewhere!!

    in reply to: Haus dishwasher won’t fill #386466
    italoabri
    Participant

    Re: Haus dishwasher won’t fill

    Hi Martin,
    Thanks for the advice, No, I wasn’t referring to a Live test. Re the 3 year storage, judging by the machine (and I have gone over it intimately) it was completely clean and brand new. It was clearly stored in a clean and dry place and the various accessories were inside, just like it had been bought from new. Having taken all sides off I can see just how new it is and it’s only been in action possibly just the once.
    I do have one question, next to the salt container there is another semi transparent container, that is possibly connected to the salt container, about 4-5 inches diameter. It appears full of liquid and it’s dark brown in colour – any clues? I could take a photo.

    in reply to: Haus dishwasher won’t fill #386464
    italoabri
    Participant

    Re: Haus dishwasher won’t fill

    Thanks Martin, it’s not flooded because I have tilted it on it’s back and front, whilst removing various panels. There was a bit of water, but just water that was in the hose.
    OK one thought here, can I put a testmeter across the two terminals on filler solenoid, I’m no expert but I keep going back towards the filler solenoid.
    Anyway, i’m now on desperate measures, before scrapping what looks like on the outside and inside a totally new machine.

    in reply to: Haus dishwasher won’t fill #386462
    italoabri
    Participant

    Re: Haus dishwasher won’t fill

    Thank you both site Admin and Moderator. Now I understand. This is in an annexe that I let and it looks like it was a poor buy!

    I’m going to try Argos to see where I can buy spare parts.

    If anyone has any tips, that would be welcome. i.e is it likely to be a filler valve?

    in reply to: Haus dishwasher won’t fill #386459
    italoabri
    Participant

    Re: Haus dishwasher won’t fill

    As a newbie I’m not sure how this forum works, but do I assume that as I have only one reply that no one else can add to any of the questions and the one comment? Just wondering if this is something no one knows anything about.

    in reply to: Haus dishwasher won’t fill #386458
    italoabri
    Participant

    Re: Haus dishwasher won’t fill

    Thank you for your response and information. The sink waste is clear as there was water sitting in it, from the first successful wash. There is no water in the bottom.
    I noticed this last night:
    when you start a wash cycle, it will hum for about a minute or two and then it stops. It will stay like this for around 3-5 minutes and the it will bleep and the 3in1 light will start flashing.

    So, based on what you have said, it is going through the normal process. by going through the drain process and then presumably after that it should start to fill.

Viewing 7 posts - 1 through 7 (of 7 total)