[jackb]

Re: Ariston Margherita 2000 wont drain

Thanks a lot, odom. I have unscrewed the filter again. Then started turning the pump, left and right. There was some resistance, and I was afraid to break it. Though, I have done it. I have turned it 4-5 times. After that, I put the filter back in. Then, I started the machine on program 4. I have monitored the progress, as I sat near it. The washer started washing for some time. After that, it paused for about 2 minutes then, it continued to drain the water and proceeded with the program (at this stage earlier, the washer froze and did not drain the water, then the knob started turning over and over) I kept monitoring the washer as it proceeded, going through the rinsing cycle, spinning cycle and finally completing the program. Something I noticed is that, the pump (probably) made 2-3 clicks (they sounded like a fan hitting a piece of paper), before each draining. Now, I have some questions please:

1. Are the program pause and pump clicks I described earlier, normal?

2. I have heard something like a screw (maybe a a small rock) hitting the container while it was spinning. I have checked the container after the program was over and did not find anything. Also, I have examined the chamber behind the filter and could not find anything. It is probably nothing, but I just wanted to ask.

3. Did I fix the problem, by turning the pump? I am thinking there was something stopping the pump from moving like hair or something and by moving the fan I released some of those. Is that the case?

4. Is there any way to take the pump out without taking the washer apart? Are there any disassembly guides?

Thanks a lot for your time, sir.

Edit: I have managed to record the clicking sound of the pump:

http://www.fileden.com/files/2010/3/9/2788580/clicking.wav

[Author]

Posts