JamboChris

Forum Replies Created

Viewing 6 posts - 16 through 21 (of 21 total)
  • Author
    Posts
  • in reply to: Electric oven recommendations #280774
    JamboChris
    Participant

    Re: Electric oven recommendations

    Hi thanks for the quick reply…

    White and up to 56cm wide.

    Chris

    in reply to: AEG Lavatherm 56600 Noise #255873
    JamboChris
    Participant

    Re: AEG Lavatherm 56600 Noise

    Just to update this thread and put it to bed 🙂

    Took the pump out and gave it a good clean. It was full of gunge, probably fluff.

    Everything is back together and the noise is gone,

    Thanks for your help,

    Chris

    in reply to: AEG Lavatherm 56600 Noise #255872
    JamboChris
    Participant

    Re: AEG Lavatherm 56600 Noise

    Ok had enough for tonight 😀

    Will return to this in a few weeks once I’m back from my holidays in Edinburgh. Will have a look at the pump and give it a good clean and overhaul.

    Thanks,

    greetings from Holland,

    Chris

    in reply to: AEG Lavatherm 56600 Noise #255870
    JamboChris
    Participant

    Re: AEG Lavatherm 56600 Noise

    Glad you enjoy the entertainment 🙂

    Not convinced it is the front fan now. Think it may be coming from the pump area (Think it is the pump, bottom of 2nd video where the water pipes are)

    Of course now it’s not making so much noise with everything stripped 🙁

    Thanks again,

    Chris

    in reply to: AEG Lavatherm 56600 Noise #255868
    JamboChris
    Participant

    Re: AEG Lavatherm 56600 Noise

    Ok, update..

    I lubricated the tension pulley and the noise is still there. It seems to come from the grey box on the right of the video. There is sometimes the Whooo noise even when the motor stops turning when the drum changes direction.

    http://s263.photobucket.com/albums/ii12 … 0_2022.flv

    Anymore ideas?

    Thanks,

    Chris

    in reply to: AEG Lavatherm 56600 Noise #255866
    JamboChris
    Participant

    Re: AEG Lavatherm 56600 Noise

    Thanks for the reply.

    Is the pulley easy to fit? Is access easy? Rough cost?

    Chris

Viewing 6 posts - 16 through 21 (of 21 total)