james0475

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 8, 2007 at 9:50 pm in reply to: Indesit IDL530 reset code #219973
    james0475
    Participant

    Re: Indesit IDL530 reset code

    Checked the float switch, moved it up and down and I can hear it click – so guess the mechanism itself works.
    The base is clear of water. Tried different programmes, none work. Depending on the selected programme depends on which LED comes on.
    Cheers….

    July 7, 2007 at 9:58 pm in reply to: Indesit IDL530 reset code #219970
    james0475
    Participant

    Re: Indesit IDL530 reset code

    held the button in for 10 seconds until it resets. Then press the start button again to start a cycle but the first led stays on constant and no wash..

    July 7, 2007 at 12:58 pm in reply to: Indesit IDL530 reset code #219968
    james0475
    Participant

    Re: Indesit IDL530 reset code

    it’s on constant however it does not come on until you press the start button to initiate a programme.

    July 6, 2007 at 10:27 pm in reply to: Indesit IDL530 reset code #219966
    james0475
    Participant

    Re: Indesit IDL530 reset code

    Cheers penguin45.
    The undertray is fully drained, the polystyrene float is sat on the tray (assuming I am looking at the right thing, in the center at the front. It was kind of stuck, not sure if this was as a result of the water or if that’s how it’ supposed to be.
    The only LED that is on (apart from the power LED) is the first one on the left.
    Thanks

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)