[jazzeddie]

Re: SMEG overflow problem

I have checked the level sensors, there appear to be 2, one on the side with an air loop up to an inlet chamber then down to the bowl, and one on the base with an air pipe direct to the bowl. I assume the first is to control inflow and the second to control water level? Anyway checked both and seem to operate ok (only a basic blow in the pipe test), also checked the pipes and bowl for obstructions but all seems fine. Is there a possibility that overloading would permit more water to be inlet before the sensor cut off supply? I assume there is no mechanisim to cause the pump to remove small amounts of water if the level is too high.

Thanks for any info

[jazzeddie]

Re: SMEG overflow problem

Thanks for that, I will have a look. I have an electronics background so I know how to be careful 🙄

[Author]

Posts