[jellicoe13]

Re: F&P 603 washer

what seems to be happening is when you select hot temp the water is only warm which tells me that the hot & cold valves are mixing…have you tried turning off the cold tap..if the machine faults then W/M is calling for the cold valve to initiate which should not happen in hot temp mode.. (only in ‘warm’ selection)therefore either faulty 12v digital inlet /proportional valves or motor controller.
❓

[jellicoe13]

Re: F&P 603 washer

Fisher & Paykel had a problem in 2003 with digital
water valves locking up on high water pressure the solution was to replace digital valve (hot) with proportional valve (cold).

425895P Motor Controller 230V rebuilt / exchange – 603 Model
has been superseded by p/n 425895R

[jellicoe13]

Re: F&P 603 washer

exact cost to replace motor controller in NZ is $175.00, cold water valve $35, hot water valve $23 this is all for the 603 model.

[Author]

Posts