[jjllrr]

Re: F&P GW709AU not filling problem

Many thanks again Penguin.. appreciate all you do!

[jjllrr]

Re: F&P GW709AU not filling problem

Hi Penguin,

Back again.. oops…. similar prob to initial issue but as below:

Initial Problem:
Will not fill hot or cold… whether machine is one cold/warm or hot. you can feel it ‘shuddering’ as it tries to fill the hot water although it is unnoticable that the cold is working (hose feels like movement but not shuddering..but not 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure)

Fix previously instigated:
As per below replaced the cold inlet valve…..

Current Problem:
is same as above and not filling although am now getting a dif diagnostic response as per;
0 0 1 0 1 0 1 1 which i think = 212

****edit.. forgot to say that even if i have the machine set to hot or cold or warm it doesnt fill the machine…

Assistance please:
Any input would be appreciated guru penguin…

Thanks again

jjllrr

[jjllrr]

Re: F&P GW709AU not filling problem

Hey Pingu (Pengium)

thanks so much, had replacement item checked and was not functioning properly.. new item fitted and working all ok.

Thanks again

[Author]

Posts