[jnsnsa]

Re: Updated: Whirlpool ADP 5340 continuously drains and stop

Maybe I can ask a simpler question:

If the water inlet valve connector is removed from the control board and I read 37 volts AC as the voltage at the connection to the control board (when the dishwasher is supposed to be filling) — rather than 220V, does this necessarily mean that the control board is malfunctioning? Is the inlet valve meant to be run at 220 Volts always or does the control board sometimes try opening it at a lower voltage?

In other words I’m trying to figure out if it’s the control board, the inlet valve (which does open at 220V) or something else. (I have checked nearly all other sensors except the flow meter.)

Thanks

[Author]

Posts