[Jocky]

Thanks again for replying, saw the brass cap I thought I needed, but ike you I think I’ll get a plumber in to sort it properly,it hasn’t been an issue all these years it’s just the usual when you get a problem I’d prefer isolation valves in place, kitchen company at time where a nightmare.
I’ve just measured internal depth roughly and it’s 50cm
to front of machine then 6cm to end of metal door, plus 18mm cabinet door. Manual says 540mm but looks like 560mm to me, won’t find out till I take it out.
Thanks for your all your help and advice.
Appreciated.

[Jocky]

Thanks for advice it is 60cm worktops we have, don’t think anything is at back. I’ll post back when I get the machine out.
The fitters at the time also fed the water inlet connection to a T piece valve which also feeds my washer (don’t know why) so cuts my washer off when I shut it. If I don’t replace the dishwasher is it a 3/4 inch blank plug I need to close it off or would I be better getting the connection changed to isolate both machines independently. Think the wife wants a new one though.
Cheers

[Author]

Posts