kikou

Forum Replies Created

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • in reply to: Beko Washing Machine: Wm 6123W, Water Leak From The Bottom #401074
    kikou
    Participant

    Re: Beko Washing Machine: Wm 6123W, Water Leak From The Bott

    Many thanks , Martin. I did not try it inside the hose, but the cap covers its end well. It seems the plug is available for online order: http://www.4ourhouse.co.uk/cgi-bin/prod … 52TB&part=

    it is called stopper…i’ll wait until i receive it highly likely or try to insert the cap inside the hose as you suggested…

    Cheers again 🙂

    in reply to: Beko Washing Machine: Wm 6123W, Water Leak From The Bottom #401071
    kikou
    Participant

    Re: Beko Washing Machine: Wm 6123W, Water Leak From The Bott

    another pic

    in reply to: Beko Washing Machine: Wm 6123W, Water Leak From The Bottom #401070
    kikou
    Participant

    Re: Beko Washing Machine: Wm 6123W, Water Leak From The Bott

    My wife has just brought me the cap shown in the attached images. It is made of solid plastic. I have tried it on the hose and it covers it well…but not too tightly to stand up probably the pressure of the water…is this the missing plug? Please note that i am installing the w.m at my new address…the cap might got lost during the move…either outside or hopefully indoor….

    in reply to: Beko Washing Machine: Wm 6123W, Water Leak From The Bottom #401068
    kikou
    Participant

    Re: Beko Washing Machine: Wm 6123W, Water Leak From The Bott

    Muv wrote:When you look at the fluff filter at bottom of front of machine, is there a black pipe there..if not this is where this pipe should be rooted, and not where you have it at the moment. I am not sure if you can purchase the stopper/cover seperately, although anything that fits inside tightly should be fine, i will however see if the part is available and let you know..


    Martin
    where should i place it if i manage to fit a stopper at its end?

    in reply to: Beko Washing Machine: Wm 6123W, Water Leak From The Bottom #401067
    kikou
    Participant

    Re: Beko Washing Machine: Wm 6123W, Water Leak From The Bott

    Many thanks, Martin. that hose is then the emergency draining hose. But i can’t see from page 35 of the manual where to connect it. Besides, it should be surely clogged otherwise water will leak out from it….any tip, please
    Cheers

    in reply to: Beko Washing Machine: Wm 6123W, Water Leak From The Bottom #401064
    kikou
    Participant

    Re: Beko Washing Machine: Wm 6123W, Water Leak From The Bott

    a clearer pic
    http://i.imgur.com/HOcNiwF.jpg?1

    in reply to: Beko Washing Machine: Wm 6123W, Water Leak From The Bottom #401063
    kikou
    Participant

    Re: Beko Washing Machine: Wm 6123W, Water Leak From The Bott

    when the w.m starts filling up, water leaks out from this black hose. strangely, there is nowhere to connect it in the machine. is it meant to evacuate a steam?

    in reply to: Beko Washing Machine: Wm 6123W, Water Leak From The Bottom #401062
    kikou
    Participant

    Re: Beko Washing Machine: Wm 6123W, Water Leak From The Bott

    Many thanks for your reply. I am attaching a better picture of the black hose. if there is any cap to place at the end of the hose, where can i buy it, please?

    PS.Kwatt…my apologies re. duplicate post. i realised after posting my first query that this subforum is more relevant. i could not delete my first post, however

Viewing 8 posts - 1 through 8 (of 8 total)