[kularm]

Re: Zanussi DW925 – No water, wont work!!!!

Alex wrote:Funny that, 2 of you with the same fault on the same series d/washer came in within a minute.

In both cases it sounds like the water valve has “locked out”.

Quick fix.. 1) Turn off the tap/water supply. 2) Unscrew the hose to release the water pressure. 3) Give the water inlet valve at the lower rear of the machine where the hose is connected a sharp tap with the handle of a screwdriver. That will release the shut off.

Now you need to investigate the reason why.

1) Remove the large filter inside the D/Washer. 2) Look at about 4 o-clock and you will see a semi transparent cap held on with a single stainless screw. 3) Remove this cap and pull out the 2 syphons, 1 at a time. 4) Shake out any excess water and clean any grease form the syphon. 5) Put it back together, reconnect the inlet hose and give it a run on rinse and hold. (Prog D) 6) If no joy, then go to repairs @, you have done your best.

That was a good range of D/Washer and worth keeping running.

Alex

Done this, stripped filters inside the machine, but it still wont work, i took out all the fittings and filters, and theres a blue fly wheel (i think this is for the spray) this stays in one spot, even after the machine has been run, also it seems to be taking water into the unit, and also running the waste water out. Please can you help.

Thanks

Mike

[Author]

Posts