[ladro]

Re: Neff S5443x2GB/42 Lower Arm not rotating

Penguin, Starman,

I thought I’d post an update,

the machine has been stripped down, must say easier than I thought – you just need to be methodical! and the fault was the diverter assembly, the shaft from the last gear wheel into the diverter disc itself has sheared off at the disc.

i can only assume that the disc has got stuck at some point, although there is no evidence to support this – anyway new part ordered – must be the most expensive plastic shaft breakage ever.

Thanks for all your help Penguin.

[ladro]

Re: Neff S5443x2GB/42 Lower Arm not rotating

Penguin45,

thanks for the quick reply just a quick question, the diverter motor looks as if it just held in by a couple of screws, if it is a case of the shaft being rounded off or similar – is it possible to replace just that component or is it the complete heater assy?
and no I’ve never taken a dishwasher apart this far before.

Thanks.

[Author]

Posts