[laz1979]

Re: Rsh1dtmh help. Buzzing and not reaching temp

Hi Bryan,
Appreciate your advice. Got a feeling I’m on a hiding to nothing.
Worst case scenario can you recommend a good value alternative to replace it with once I decide its had its day?
Are cda any good cda70?(5 yr guarantee too)
Thanks again
It is appreciated

Sent from my iPhone using Tapatalk 2

[laz1979]

Re: Rsh1dtmh help. Buzzing and not reaching temp

Soooooo bloody annoying this. Doing my head in, keep wasting food too.
I must admit it is/was quite hot on the bottom right hand side,assume that’s the compressor area?!? also noise has come back again.
He’ll be called again in the morning, not expecting allot of help now. Probably have to save for a new one. Maybe not Samsung!!!!

Sent from my iPhone using Tapatalk 2

[laz1979]

Re: Rsh1dtmh help. Buzzing and not reaching temp

And guess what…….. Lol
Still not working. Been fine for 3/4 hours. Thought freezer wasn’t getting cold enough so a quick on/off and the displayed -18 was actually shown as a plus 2.
God knows what’s going on.
Any ideas?

Sent from my iPhone using Tapatalk 2

[laz1979]

Re: Rsh1dtmh help. Buzzing and not reaching temp

The whole fridge? That doesn’t sound great.
Hmmmm ok, see how it goes.
Thanks for coming back to me though.

Sent from my iPhone using Tapatalk 2

[laz1979]

Re: Rsh1dtmh help. Buzzing and not reaching temp

Another update:
He was here for over an hour today, apparently it had a blockage, caused by the old compressor, leaked oil/gunge.
All back and working and once turned on down to temperature within 4 hours like it was when I first got it.
(Fingers crossed)

Sent from my iPhone using Tapatalk 2

[laz1979]

Re: Rsh1dtmh help. Buzzing and not reaching temp

Hi bob,
Still struggling if you can help please;-)
New compressor fitted and has been ok apart from being noisy.
Today the freezer is not freezing properly. Says -18 but turn off and on and shows 3 degrees. Gets down to -18 but again true temp is high after off and on.
Any thoughts as the guy is coming Monday and after a new compressor I’m stressing at more££.
Thanks

Sent from my iPhone using Tapatalk 2

[laz1979]

Re: Rsh1dtmh help. Buzzing and not reaching temp

Just to update invade it helps anyone else:
All seems ok, too 24 hours to properly freeze down after being off for 3 days. I was being impatient.

Sent from my iPhone using Tapatalk 2

[laz1979]

Re: Rsh1dtmh help. Buzzing and not reaching temp

Well, had the guy out this morning and he diagnosed to compressor as was clicking away but not firing.
Changed compressor and gas etc.
been 4 hours since he gone, fridge nice and cold but freezer is 17 degrees and no sign of getting cold.
Any thoughts??

Sent from my iPhone using Tapatalk 2

[laz1979]

Re: Rsh1dtmh help. Buzzing and not reaching temp

Hi bob,
Turned it back on this morning.
It turns on, display comes on and I can hear it very faintly but it does not ‘fire’ up and get cold. Hmmmm
What do you think?
Thanks again

Sent from my iPhone using Tapatalk 2

[laz1979]

Re: Rsh1dtmh help. Buzzing and not reaching temp

Hi bob. Thanks for the reply. It does come back on and the loud buzzing was back. Turned it off again.
It’s been off since this morning so will keep it off till Sunday evening/Monday morning and see how we go.
Did call the engineer up I know and he is coming Monday, just be nice to be clued up before he suggests compressors etc.

Sent from my iPhone using Tapatalk 2

[laz1979]

Re: Rsh1dtmh help. Buzzing and not reaching temp

It’s now gone completely silent and not cooling at all.
Electrics are still on but no cooling?
Any thoughts anyone?!?

Sent from my iPhone using Tapatalk 2

[Author]

Posts