[LeeJones]

Re: Servis Pump question

Dave_Conway wrote:

LeeJones wrote:
Do i need to send the one ive got back to you ?

Not on this occasion thanks Lee 🙂

Dave.

Ok thats much appreciated

Thanks

[LeeJones]

Re: Servis Pump question

Dave_Conway wrote:OK, thanks.

I’ve sent another pump, this time it’s just the pump motor with the terminals on the other side than PMP952 so it should be fine 🙂

Was that email error caused by our server or your ISP ?

Dave.

Ok thank you?

Do i need to send the one ive got back to you ?

The email is from my ISP the email is still in a queue so you might get it in a day or so just ignore it if you do

[LeeJones]

Re: Servis Pump question

Order Number: 4392

The email never got throught because my ISP tells me theres a huge backlog of emails to be delivered 😡

[LeeJones]

Re: New problem 🙁

iadom wrote:Model number, make ? Or could it be a Servis M6011 😉

Jim.

Knew i forgot to post something lol

Yea its a servis M6011

Serial number is 20050710203-010077205-01 if thats any help

It only makes the noise when its spinning slowly not on fast spin

[LeeJones]

Re: Servis Pump question

Dave_Conway wrote:

LeeJones wrote:
If i send this back do you have any of the pumps that would fit my machine in stock at all ?

Not the short housing version no but I can get one, genuine Servis only at three times the price though 🙁

LeeJones wrote:Also ive sent an email back

Not recieved I’m afraid as yet for some reason.

Dave

Its ok doesnt really matter i mean its only the motor that needs replacing

I sent an email back from one that i got off whitegoods saying about my order have i replied to wrong email ?

[LeeJones]

Re: Servis Pump question

Dave_Conway wrote:Is it secured tightly to the base and not touching the side panel etc ?

It may be a dodgy pump, if it is, please reply to the shop@ email notification and I’ll sort it.

Dave.

Tight as it will go it sounds like it is the pump the noise the motor is making is bad

If i send this back do you have any of the pumps that would fit my machine in stock at all ?

Also ive sent an email back

[LeeJones]

Re: Servis Pump question

Ok now this new pump is making one hell of a noise like a deep sounding growl type noise it pumps water out but its making more of a noise than the old one how come ?

It sounds fine when pumping water out but when it runs dry it sounds pretty bad even the old one which has worn out doesnt sound that bad 😯

[LeeJones]

Re: Servis Pump question

Dave_Conway wrote:

LeeJones wrote:
Serial number is 20050710203

Yep, that serial number uses the short bodied housing, I assume it’s sorted now though by swapping them over ?

Dave.

Yea its fine just need to but it back together 😆 well try anyway the cables do reach just pull them back

[LeeJones]

Re: Servis Pump question

Penguin45 wrote:It’s an AC circuit, so for this application it won’t matter which way round you wire the pump motor.

Regards,
Penguin45.

Ok thanks penguin i just wanted to be safe than sorry 😳

[LeeJones]

Re: Servis Pump question

Ok ive but the new motor on the old pipe part my question is ive got 2 cables both grey and ones L and the other is N and there is no marking on the cables which one would go where and question is what would happen if the wrong cable went on the wrong plug on the pump motor 👿

Last time i attempt to fix a washing machine 😳

[LeeJones]

Re: Servis Pump question

Dave_Conway wrote:

LeeJones wrote:
It doesnt reach the holes the only way would be to bend the pipe thats coming from the drum

Eh ? 😕

The hose that fits to the pump comes from the filter unit at the front, not from the drum (assuming the model number is correct) 😉

Dave.

The holes on the frame it seems to be needed to force the pump on the frame which then makes the pipe get a minor bend

My model number is M6011

That is the one i ordered http://www.ukwhitegoods.co.uk/modules.p … cts_id=162

Serial number is 20050710203-010077205-01

Pump works but it makes a noise because of the vibration on the frame of the washing machine

Kirk wrote:Hi Dave doesn’t this model use the short pump which is at the wrong angle and you could take pump motor off and put on old housing but I think wires or the connections need to be modified.

Kirk

Could that be done since its the motor on the old one thats making a noise and attach the motor to old part

[LeeJones]

Re: Servis Pump question

It doesnt reach the holes the only way would be to bend the pipe thats coming from the drum ive pushed the pipe off the drum far as it will go on the pump but i cant screw it down because the pump is more to the back of the machine than the holes are 😕

Its just the postion of the pump is well looks impossble to fit it where the old one was

[Author]

Posts