Forum Replies Created
-
Posts
-
Re: Siemens SN66T095GB/86 E10 error please help.
Cheers Steve,
The Zeolith drying system in the Siemens/Bosch (and presumably Neff) machines equipped with that option consists of three main components. A metal tank filled with Zeolite, into which goes the heating element (tubular glass and plastic with 4 elements plus a thermostat probe and a non-replaceable fuse) and finally, connecting to the other end of the heating element, is a plastic fan with a small circuit board.
There is a lot online about the heat pump failing but I only found one other post concerning this separate heating element.
Re: Siemens SN66T095GB/86 E10 error please help.
Received the replacement Zeolith heating element today and it read 40 ohms across the terminals (as opposed to infinity on the old one) so fitted it this evening and I now have a working dishwasher again, heat aplenty.
Hopefully these one-sided posts will help someone else out if they are in a similar situation! 🙂
Re: Siemens SD6 P1S dishwasher
If you are getting E15 code you have water going into the base of the machine and activating the anti-flood switch. Tilting it removes the water from the base, there is a polystyrene float that will then settle again and relieve pressure on the attached switch, clearing the error.
The question is, how is water getting into the base – you must have a leak somewhere. Worth checking that out.
E1 is listed as an electrical issue . . . if you have a leak then water will be finding it’s way where it shouldn’t (in the base tub of the machine) so again you really want to be finding and remedying the leak.
I also have a Siemens, 4 years, it’s been a right pain. Good when it’s working but gone wrong a few times like yours. Wouldn’t buy another, but I think the Zeolith drying system in mine was new at the time and maybe they’ve made it a bit more robust on newer machines.
Re: Siemens SN66T095GB/86 E10 error please help.
Took apart the Zeolith drying unit, can’t get any sort of resistance reading from the heating element that goes between the tank and the fan unit, it also looks in pretty poor shape overall. Going to take the plunge on a new one I think.
