leonmelhuish

Forum Replies Created

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • in reply to: hotpoint aquarius 1100 wm 63 #209532
    leonmelhuish
    Participant

    Re: hotpoint aquarius 1100 wm 63

    thaks for that jim will give that a go 😀

    in reply to: whirlpool generation 2000 g2p dwi/1 wh #185123
    leonmelhuish
    Participant

    Re: whirlpool generation 2000 g2p dwi/1 wh

    doooh!!!!!!!! its not a switch its a thermostat!!!!! sorry for confusion i know what i meant anyway 😀 just for the record i did test the NTC. however unless you know the exact calibration in ohm’s and degrees your totally f****d!!!!!!! (just incase someone else is convinced it’s not the NTC because they get a reading on their meter)


    thanks again leon 😀

    in reply to: whirlpool generation 2000 g2p dwi/1 wh #185121
    leonmelhuish
    Participant

    Re: whirlpool generation 2000 g2p dwi/1 wh

    greg your a star! :tup: fitted the new NTC switch, bobs your uncle fannies your aunt!!!!!! anyone else with the same problem ?????? here’s your solution!!!!


    many thanks again 😀
    leon

    in reply to: whirlpool generation 2000 g2p dwi/1 wh #185119
    leonmelhuish
    Participant

    Re: whirlpool generation 2000 g2p dwi/1 wh

    thanks greg
    will order part asap will post reply to outcome

    cheers i can see the light 😀

    in reply to: whirlpool generation 2000 g2p dwi/1 wh #185117
    leonmelhuish
    Participant

    Re: whirlpool generation 2000 g2p dwi/1 wh

    i hope so that means it’ll be cheap as chips to replace!!! you know a rough price & do you guys stock it?

    in reply to: whirlpool generation 2000 g2p dwi/1 wh #185115
    leonmelhuish
    Participant

    Re: whirlpool generation 2000 g2p dwi/1 wh

    hi greg thanks for reply

    there is no groups of flashing it is just a constant flash as with the audio beep too.

    in reply to: whirlpool generation 2000 g2p dwi/1 wh #185113
    leonmelhuish
    Participant

    Re: whirlpool generation 2000 g2p dwi/1 wh

    thanks dave for reply 😀

    do you think it maybe the NTC then? i have trawled through all pages in this forum can’t find a simular fault. any ideas?

    cheers leon 😀

Viewing 7 posts - 1 through 7 (of 7 total)