[mack1]

Just an update to say that the problem seems to have gone away…for now anyway.
Nearly a week of correct selection of programs.
Thanks for all your help and if it does give up I will be back to order a good one from here.
Cheers,

Mack1

[mack1]

helo_75 wrote:dont be suprised if the new selectors gone faulty

as per my last post, if its the right switch, it should have a white shaft

good luck

Hi again,
back home know and have taken the switch selector off to have a look at it.
It has a white shaft and has the part no RD2F1A1Q16A 96751 46 on the side of the brown body.
Strangely enough having used the machine for the first time in several days it worked correctly selecting the correct cycle for my needs but on the next wash it skipped every second program and now it is back to the original failure noted on original query. But ….. on taking the selector apart I tried again to check the selections and it appeared to be working!
Not sure what’s going on… might be a loose connection?
Again, any inputs greatfully received.

Cheers,

Mack1

[mack1]

Hi Guys,

Cheers for all the replies.
I have unfortunately ditched both the original part and the packet that the new part came in. The packet was a Hoover branded packet and the switch did work for about 2 washes then the original fault came back.

I will see if I can find the part no on the actual switch and report back.
Unfortunately I won’t be able to do this for a few days but will be back in touch probably at the end of the week/weekend.

Cheers again,

Mack1

[mack1]

helo_75 wrote:ok, what was the part number of the part u fitted and was it new?

Hi,
Thanks for the quick reply.
I bought the part from 4cleanerfloors.co.uk before I discovered this site.
Part No = 5045-1712-2689-2

Not sure if you allow direct links to the actual part but a quick search for the above part no. on the site will show it.

I assumed it was the correct part?

Cheers,

Mack1

[mack1]

Hi Again,

Any more inputs greatfully accepted.
Still not selecting all programs 🙁

Cheers,

Mack1

[mack1]

Re: Hoover VHD814-80 – Misses programs – only 7 out of 15 wo

Penguin45 wrote:Probably the selector switch at fault – there was a known issue with them. Part no. 41014502 – spares@ukwhitegoods.co.uk will be able to supply a replacement promptly.

Penguin45.

Hi Penguin45,

Thanks for your inputs.
If the part you are suggesting is the actual part that you turn to select the programs then unfortunately I have already changed that without any success.

This fault occurred after I had worked on the pump to remove a blockage (kids hairclip) from the pump and once put back together although intially working within 2 washes it started showing up the program fault.
I’m not sure these two incidents are related but worthy of note I thought.

Cheers,

mack1

[Author]

Posts