Forum Replies Created
-
Posts
-
Re: Indesit WD12SUK
i have fitted a new eeprom and the machine is working fine now. thanks for all the help.
Re: Indesit WD12SUK
spoke to the company who supplied the board and they sent me a diagram showing the eeprom. Had a look at the new board and it wasn`t fitted. Had to de-solder the chip off of the old board and i have fitted it to the receptor on the new board. The machine will now carry out the spin cycle, however when a wash cycle is selected the light flashes then stays on showing the machine has accepted the command however it won`t do anything. Any ideas that could help?
Re: Indesit WD12SUK
If i am right the eprom is the black piece of metal with what looks like cooling fins on each end at the back left of the board. if so then yes the new board has it fitted but i do not know if it is programmed correctly. i would seriously like to hope that the firm that sent me the board would have sent it pre-programmed.
