Forum Replies Created
-
Posts
-
Re: Bosch dishwasher – SGV53E43GB
Ok great. I’ll get onto that this afternoon. Many thanks for the advice, i’ll update later.
Re: Bosch dishwasher – SGV53E43GB
Yes that wasn’t clear…
I can hear the pump running at the start of the cycle. What I meant is that if the pump drain (impellor area) appeared to be clear can any other part of it be causing the issue.
I’ll check the inspection cover. Provided that it is fitted correctly, how would I go about checking for a blockage in the system?
Re: Bosch dishwasher – SGV53E43GB
Yes, I did pull the whole machine and took the metal base off to check the pump / impellor wasn;t blocked. I was expecting to find some debris in the impellor but it was clear. It all seems ok, but I can check it again tomorrow…..i’m at the extent of my diy skills now, so hoping for an easy resolution.
The pump clicked and fitted back in nicely. I also took off the drain hose from the side of the machine and blew through, it seemed clear. Is there anywhere else I should check for a blockage.
Could there be a pump be blocked behind the impellor?
Cheers
Liam
Re: Bosch dishwasher – SGV53E43GB
Hi Martin – does the model number help SGV53E43GB/37
There is an id ref too: 9102……
Liam
Re: Bosch SGS53C12UK/01 – water not draining from machine
Great advice – checked the connection to pipework under the sink on Sunday afternoon…..and it was properly clogged up.
The draining of water action, still sounds a little ropey at times, but it works which is the main thing.
Thanks
Thanks nomadPaul,
I did take the small cover off the sump / impellor to check for any debris, i’ll double check that it’s firmly back in place.
The drain hose is clipped into the kitchen waste pipe under the sink. I’ll disconnect it tomorrow and see if it drains. Should I check the drain connection at the other end i.e. going into the base of the dishwasher?
It looks like access is going to be awkward.
Cheers
