[manpun33]

Re: Hotpoint Futura hf8b593

Apologies for not reading correctly so it is 2&5 from the bottom

[manpun33]

Re: Hotpoint Futura hf8b593

Or is it 02 disregarding 5 as that is end

[manpun33]

Re: Hotpoint Futura hf8b593

Sorry that would be 2&5

[manpun33]

Re: Hotpoint Futura hf8b593

End and rinse as well from vertical and makes noise as if it’s agitating

[manpun33]

Re: Hotpoint Futura hf8b593

sorry not all the lights just the horizontal 5

[manpun33]

Re: Hotpoint Futura hf8b593

Changed element so now it doesn’t trip the RCD but the drum doesn’t agitate/rotate at all. It just fills up and after a while pumps the water out and all lights flash at the end. Checked the 3 phase connectors to the motor all giving a reading of 3.8 in between them and couldn’t see any voltage inbetween the incoming cables. Do you think it’s time to order a new machine?

[manpun33]

Re: Hotpoint Futura hf8b593

Haha that was my new terminology. Heating element, earth to live/neutral showing short. Am I right in thinking maybe its time for a new element 🙂

[manpun33]

Re: Hotpoint Futura hf8b593 ser 304232030*30797470001

Upto start of the wash okay but trips as it starts to fill up for a few seconds. Just opened the top and checked the main electrical block with multimeter. N & E showing short. Just need to figure out where, has inlet valve any electrics?

[manpun33]

Re: Hotpoint Futura hf8b593

My apologies iadom, it’s my first time here and I thought I had posted at the right place

[Author]

Posts