[martyke]

Re: Indesit WG820G Belt

Martin wrote:Firstly it is hoped you have the correct sized belt in the first place?? It should have stamped on it “1288” (1,288mm’s in total length) if not then you have the wrong belt. 🙁

To fit it without taking the skin off your fingers, simple tie the belt to the main drive pulley with a piece of string OR a cable tie. As you rotate the belt onto the two pulleys, simply cut the string and continue the final 20 or so degrees to fully locate it :tup:

Martin

Many thanks
Did have correct size- real swine to do- but managed it with 2 pairs of hands and several screw drivers for leverage 😛

[Author]

Posts