[Mitchb23]

An update

Now completed 10 wash cycles and no further leaks.

The salt container was full of water from about cycle 7-9. After cycle 10 its fully emptied.

The only thing different is the position as it’s pulled out. This may have changed position / efficiency of the drain hose as it does seem quite long.

I’ll reposition tomorrow and see how it goes.

Thanks for your help so far

[Mitchb23]

Just gave it a run through with water ,try remove clean some of the gunk, didn’t touch the brown stuff.

[Mitchb23]

Thanks

Been running with the covers off this week, been 3 cycles.

No apparent leak and zero water in flood tray.

I did clean the soft waters/ salt resivour , unsure if that’s made any difference.

I’ll report back after a few more cycles

[Mitchb23]

Yeah, anti flood come on every 3 / 4 days over last 2 weeks after being dried up.

The soft water reservoir is retaining water , not sure if it should ?

I think its maybe building up in the soft water reservior and then leaking from there as there is some holes on the part that meets the water cassette that appear to be designed for water release

[Mitchb23]

Thanks for the reply,
​​​​​
checked the serial number and it’s starting 410.

Cant seem to due to upload pics size limits ?

​​​​​​​Is it on the underside of the filter between flood floor and main body of dishwasher or from within the machine with the filter removed ?

[Author]

Posts