mitsumike

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • in reply to: Bosch SMS6012GB/20 Timer sticking. #410222
    mitsumike
    Participant

    Re: Bosch SMS6012GB/20 Timer sticking.

    Ok so today the machine tripped the supply when I opened the door. I can see that the main brown feed to the on/off switch has fractured and shorted out where it bends. Is it possible to rewire just this one brown cable or would it have to be a compete loom? Probably not worth the cost of a new loom though!

    in reply to: Amana Fridge Freezer #408039
    mitsumike
    Participant

    Re: Amana Fridge Freezer

    Freezer eventually failed completely so has been scrapped and a new Bosch purchased. Anyone wish to buy an icemaker from this model (Whirlpool W10190972) only 6 months old?? A.J.

    in reply to: Amana Fridge Freezer #408037
    mitsumike
    Participant

    Re: Amana Fridge Freezer

    Thanks for that ELDAR59, so I now have to decide whether to take a risk and change the 2 PCB’s. A new compressor was fitted about 2 years ago so hopefully it will be OK. As I said it is quite happy running with the door open.
    I have found the 2 boards priced at £373, do you know anywhere with a better price than that please? A.J.

    in reply to: Amana Fridge Freezer #408034
    mitsumike
    Participant

    Re: Amana Fridge Freezer

    Thanks for the info Bob, but not what I wanted to hear as the only source I can find supplies both PCB’s (high and low voltage) for £373.
    I presume it is only the high voltage board I need or is that not correct?
    So it might be a case of scrapping the whole thing regrettably.
    A.J.

Viewing 4 posts - 1 through 4 (of 4 total)