MJ

Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • in reply to: Indesit DI67 trouble / error codes #161058
    MJ
    Participant

    Thanks. I’ll wait & see if it becomes more of a problem than just shutting the door firmly.

    MJ

    in reply to: Indesit DI67 trouble / error codes #161056
    MJ
    Participant

    Re: Indesit DI67 trouble / error codes

    UPDATE – I was about to disconnect everything last night when I had one last go at starting the dishwasher – and it worked!

    Bit embarrasing really… It seems the problem is with the lock on the door not working properly. If I close the door and then give it a firm push by the handle, the catch engages and wash programme starts.

    Therefore I’ll probably keep the machine as it operates fine. Can the door lock be fixed quite easily?

    Thanks.

    in reply to: Indesit DI67 trouble / error codes #161055
    MJ
    Participant

    Re: Indesit DI67 trouble / error codes

    Oh dear! To be honest, I’ve not got a preferenece for any brand & don’t have a problem with Indesit. I suspect my second hand dishwasher suffered from sitting in a garage for 3 months unused.

    It hasn’t cost me anything though, so I won’t complain.

    in reply to: Indesit DI67 trouble / error codes #161053
    MJ
    Participant

    Re: Indesit DI67 trouble / error codes

    Thanks very much for your help.

    As I expected, its not an economical repair. I’ve seen a Hotpoint FDW60P in my local Costco for £200 which does a half load (keeps Mrs MJ happy) so I’ll get the money back on this Indesit and buy a new machine.

    MJ

    in reply to: Indesit DI67 trouble / error codes #161051
    MJ
    Participant

    Re: Indesit DI67 trouble / error codes

    Thank you for your help.

    At the end of the last successful wash, the light second from the left was flashing continuously.

    However, none of the lights flash now, regardless of the setting it is on.

    If I turn the dial on to any programme, the machine beeps once and the correct programme light is displayed – but nothing else happens.

    If I turn the dial back to reset, I get four beeps – no flashing lights.

    MJ

Viewing 5 posts - 1 through 5 (of 5 total)